PR70 Software Change History

The Version History of the PR70 Software is listed below. The software currently installed on the PR70 can be found by navigating to the setup system screen of the ADM or the maintenance screen on a standard display module.

To upgrade to a newer software version, order the appropriate “Software Upgrade Token” as listed below. This Upgrade token is used to upgrade software on all of the system components per the procedure described in maintenance section of PR70 instruction manual 312759 (Advanced Display) or 312393 (Standard Display)..

See instruction manual 312759 (Advanced Display) or 312393 (Standard Display) for complete details on the PR70 system. The latest revision manual can be found at www.Graco.com.

Software Upgrade Token: 15W045 Series X

  • System 15W045y (Software link) version 1.08.001
  • ADM: 16F532 version 1.06.003
  • USB 16F630 version 1.03.001
  • FCM3:  16M411 version 1.04.002
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32
  • Rebuild all new modules on GCA2 platform, to enable the CAN boot loader functions to operate, improve performance and to allow operation with new internal ADM components.
  • Added logic to hide the material counters on the System Setup screen if the Ratio monitoring option is turned OFF (typical) or not configured. 

Software Upgrade Token: 15W046, Series W

  • System 15W045w Series W
  • ADM: 16F532 version 1.05.001
  • USB 16F630 version 1.02.004
  • FCM3:  16M411 version 1.03.002
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

 

  • FCM3 Module – Corrected issue where the Ratio displayed to the user was not consistently visible to the user if Ratio Monitoring option was selected. 

Softtware Upgrade Token: 15W046, Series V

ADM: 16F532 version 1.05.001

USB 16F630 version 1.02.004

FCM3:  16M411 version 1.03.001

TCM: 15M871 version 1.07.005

Display Module: 15M410 version 2.27

ADM (old): 15V024 version 1.03.002

FCM (Old): version 1.32

 

New ADM, FCM3 and USB (in New ADM)  – Made the following improvements to the product:

  1. Fixed an intermittent issue with the Light tower logic, where when an error (Advisory, Deviation or Alarm) clears on the ADM, it would not clear on the light tower.
  2. Added the same improvements to the Tank Auto/Manual Fill logic already incorporated into the PR70F product.  The following items were added to the logic:

            a. The logic which changed the Auto-Refill mode from “High Level..” or “Empty.. ” auto refill to “Manual Auto Refill” mode when a fill was aborted (from a time out condition, or if aborted by the user) was removed.

            b.Logic to generate a “Record” or “Advisory” level error/ Event was added to record if a “Manual Fill Instigated” occurred, or a “Fill Aborted Before Done” condition occurs.

            c. Logic was added to all Auto Fill modes (High, Empty and Accumulator) to instigate an automatic fill operation when material reached the low level sensor if the previous fill was aborted, unless the previous fill was aborted with material below the low level sensor.  For this condition, the user will need to instigate a manual fill when the empty supply condition is resolved.

            d. Logic was added to the Accumulator fill feature to generate “Level Sensor Error” if both the low and high level sensor magnets detect material.

        3. The PLC interface logic pertaining to the shot selection control bits was improved, based on test results performed on the PR70F product.

 

  • Release date:  February 16, 2017

Software Part Numbers and Versions: 

  • ADM: 16F532 version 1.04.048
  • FCM3: 16M411 version 1.02.031
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (Old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

New ADM & FCM3 - Per the request of a distributor, a "Low Level Alarm Time" user entry feature was added to allow a user to delay a Low Level Alarm X minutes after the condition is detected. 

  • Release date:   April 14, 2016

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.045
  • FCM3: 16M411 version 1.02.024
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (old): version 1.32

New ADM & FCM3 – Added a Light Tower option, removed necessity for the Blue Run Token (P/N: LC0135), fixed a displayed revision issue, simplified the flow meter/ Ratio Monitoring logic to operate with additional meters, and corrected some other error generation issues.

  • Release date:  December 11, 2013

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.042
  • FCM3: 16M411 version 1.02.012
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (old): version 1.32

New ADM – Fixed screen saver issue that occurred when the screen would turn off after 5 minutes regardless if the screen saver was set to 0 (disabled) or greater than 5 minutes.

  • Release date:  October 04, 2013

Software Part Numbers and Versions: 

  • ADM: 16F532 version 1.04.040
  • FCM3: 16M411 version 1.02.009
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (old): version 1.32

New ADM – Fixed sequencing issue that only occurs with shot 1. Any sequence that included ONLY shot 1, the display would not show any shots in that sequence. Shots 2-50 did not cause the issue and if shots 2-50 were included in a sequence that contained shot 1 the sequence was determined valid.

  • Release date:  December 28, 2012

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.039
  • FCM3: 16M411 version 1.02.009
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

New ADM – Fixed intermittent white screen issue. Re-classified all the “No Temperature Rise” errors from Alarm to Deviation Classifications. Added logic to only show the “Low Level” and “High Level” fill control options on the Options 1 setup screen, depending upon if the machine has 1 or 2 FCM3 installed, to simplify understanding of the tank options for the user.

  • Release date:  September 18, 2012

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.029
  • FCM3: 16M411 version 1.02.009
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

FCM3 & New ADM – Fixed a few level sensor issues which were encountered during production.

Release date:  September 5, 2012

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.027
  • FCM3: 16M411 version 1.02.008
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

FCM3 & New ADM – Made Low Level Tank Error generation, independent of each side. Added “Level Sensor Problem” error code to account for condition when material sensed at high, but not low level sensor. Added interlock to prevent refill operation at boot up during the ADM splash screen. Fixed other misc. auto-refill issues, and tank fill options on the Manual setup screen.

Release date:  June 20, 2012

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.021
  • FCM3: 16M411 version 1.02.002
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.27
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

Display Module – Fixed issue saving Low Level Sensor feature state after power up. FCM3 – Added capability to the “Interrupt – Cancel Line”, to disable machine if held active.

Release date:  May 6, 2012

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.021
  • FCM3: 16M411 version 1.01.005
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.26
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

Display Module and ADM – Updated component driver in display module, to address a contrast issue. In the ADM, fixed issue where the ADM would generate temperature related errors if a heat zone was turned OFF (or disabled).

Release date:  Feb. 6, 2012

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.016
  • FCM3: 16M411 version 1.01.005
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.25
  • ADM (old): 15V024 version 1.03.002
  • FCM (Old): version 1.32

ADM & Old ADM – Fixed issues concerning the use and generation of the low temperature alarms on the ADM, and using the “Disable Dispense w/ Low Temp.” feature. This feature would produce an oscillatory response of the “Ready_OUT” signal (on the PLC interface) to the user when a low temperature condition would exist for a zone and the feature turned ON.

  • Release date:  Jan. 24, 2012

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.003
  • FCM3: 16M411 version 1.01.005
  • TCM: 15M871 version 1.07.005
  • Display Module: 15M410 version 2.25
  • ADM (old): 15V024 version 1.03.001
  • FCM (Old): version 1.32

TCM: – Updated to Fix bug found during the NVH GMS Development.

 

  • Release date:  December 1, 2011

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.04.003
  • FCM3: 16M411 version 1.01.005
  • TCM: 15M871 version 1.06.001
  • Display Module: 15M410 version 2.25
  • ADM (old): 15V024 version 1.03.001
  • FCM (Old): version 1.32

16M411, 16F532, 15V024 – Added Pressure limiting and display capability to user. Added additional logging capability to the USB (New ADM Only, Logging of dispense pressures, etc…), and event logs. Updated system screen to new P/N format. Added Pressure UOM selection to Options 1 Screen. Added “Disable Pump Timeout Error” option to the Options 3 screen. Fixed Accumulator filling & other miscellaneous bugs. 15M410 – Added Over and Bad Pressure transducer alarms (Errors 51 – 54). Added same Disable Pump Timeout Error option to the Maintenance 3 screen.

  • Release date:  June 13, 2011

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.03.001
  • FCM3: 15V027 version 1.03.002
  • TCM: 15M871 version 1.06.001
  • Display Module: 15M410 version 2.02
  • ADM (old): 15V024 version 1.02.002
  • FCM (Old): version 1.32

16F532 – Updates to the ADM software were incorporated, transparent to the user.

  • Release date:  March 21, 2011

Software Part Numbers and Versions:

  • ADM: 16F532 version 1.01.001
  • FCM3: 15V027 version 1.03.002
  • TCM: 15M871 version 1.05.006
  • Display Module: 15M410 version 2.02
  • ADM (old): 15V024 version 1.02.002
  • FCM (Old): version 1.32

16F532 – Initial Release of new ADM. Older style ADM obsoleted.

  • Release date:  June 16, 2010

Software Part Numbers and Versions:

  • ADM (old): 15V024 version 1.02.002
  • FCM3: 15V027 version 1.03.002
  • Display Module: 15M410 version 2.02
  • TCM: 15M871 version 1.05.006
  • FCM (Old): version 1.32

15V024 – Fixes a few bugs associated with the ADM.

15V027 – Lowered amount of travel required before generating a pump timeout error.

  • Release date:  Jan. 20, 2010

Software Part Numbers and Versions:

  • ADM (old): 15V024 version 1.02.002
  • FCM3: 15V027 version 1.03.002
  • Display Module: 15M410 version 2.02
  • TCM: 15M871 version 1.05.006
  • FCM (Old): version 1.32

15M410 – Human interface changed to not require the use of the Point LED’s on the Display module Membrane switch.

15027 – Added logic to retract pump if Interrupt/Cancel line activated if pump stalling to pressure.

  • Release date:  Aug. 05, 2009

15V024 – Foreign language capability added to the ADM.

  • Release date:  Jan. 13, 2009

15V024, 15027 – Added Pressure transducer and flow meter capability for the ADM versions of the product.

Read, understand and follow all instruction manuals and warning labels supplied with all equipment. Only trained and qualified personnel should perform repairs on the equipment. To access the latest manuals in your preferred language go to "www.Graco.com" and use the "Search" function.