P7D_ Pressure Imbalance High (Alarm)
To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.
| Cause | Solution |
| Dispense line is clogged | First try purging fresh material through the system. Then relieve pressure and check for cured material or obstructions in the dispense valve. |
| Orifice restrictions sized incorrectly | Adjust orifice restrictions to balance pressure of A and B materials. |
| Out of material | Verify material supply. |
| Pressure imbalance is defined too low | Increase pressure imbalance amount from the Setup screen of the Advanced Display Module (ADM). |