A8DB : No Current Gun 6

To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.

  • Check fuses F3 and F4 or F7 and F8 on MZLP that controls the error channel.
  • Check that electrical plug on hose is plugged into back of MZLP.
  • Check continuity of hose pin A gun end to J on MZLP connector end of hose and pin C on gun end to pin A on the MZLP end of the hose. Reading should be 0-1 ohm. Replace hose if measurement is outside this range.
  • If system only uses one hose and gun, electrical connector of the heated hose must be plugged into channel 1 of the MZLP.