E-27: Color/Catalyst Fill Alarm

To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.

System detects no meter pulses, or system must detect at least 10cc of material from each side throughout the color/ catalyst fill time duration

Check that meter cable is connected.
Clean or repair meter.

Gun, dump valve or correct color/ catalyst valve not open

Open the valve.

Exhausted fluid supply

Check fluid level and refill if necessary.

Switch settings (S3-S6) on color change board do not match hardware configuration

Verify that color change board switches are set correctly. See installation manual.

Fuse F1, F2 or both are blown

Verify condition of fuses and replace if necessary. See Repair-Parts manual.