EVR System Version 1.13.007: April 1, 2024
To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.
Software Upgrade Token 19236 Series F
| Component | Part Number | Version |
|---|---|---|
| System Software | 19C236f (software download) | 1.13.007 |
| Advanced Display (ADM) | 19C229 | 1.13.003 |
| USB Configuration | 19C232 | 1.16.002 |
| Motor Control Module (MCM) | 19C233 | 1.14.075 |
| Inlet & Recirculation Fluid Control Module (FCM3) | 18H022 | 1.01.011 |
| Voltex Dynamic Mix Valve (FCM3) | 18C787 | 1.05.008 |
| Tank Stand(s) Monitor/Control Module (FCM3) | 16A206 | 1.05.015 |
| Auto Multi-Zone (AMZ) | 17L866 | 1.03.008 |
| I/O Daughter Board (DB) | 2002026 | 1.01.027 |
| Communications Gateway Module (CGM) | 17P796 | 3.02.001 |
Change History
IMPORTANT: This token will delete and reset the recipes and system information, it is recommended to take a picture of desired information before updating, as the information will need to be re-entered after updating is completed.
IMPORTANT: This token will reset the USB log; therefore complete a USB download to keep the data.
Software enhancements:
New screen layout for the setup screens
Heat control integrated with the system
Live Ratio reading when the machine is dispensing
Disabled the base purge feature, when valve type is selected as MD2
Heat Box control for 8 zone, and Heat Box expansion control for an additional 8 zones of heat
Added an auto detect stitch mode for the USB logs, where if another dispense is triggered within 250ms of the last one finishing, the system will sum those dispense as one and record it into the shot log
New maps created:
EVR Heated Map, Token P/N: 2006192
EVR Ambient Map, Token P/N: 2006194
Fixed issue with CCCX error being triggered on power up