InvisiPac HM10 Software Change History
The Version History of InvisiPac HM10 Software is listed below. The software currently installed on an InvisiPac HM10 system can be found by navigating to the Advanced Software screen. To upgrade to a newer software version, order the latest Software Upgrade Token listed below.
All InvisiPac HM10 systems should match one of the following system versions.
Reference InvisiPac HM10 instruction-parts manual:
HM10: 3A7259
NOTE: Upgrading software may clear some USB data (i.e. pump cycles, material volume, etc.) It is recommended that a full USB download be completed before upgrading software.
| Component | Part Number | Version |
|---|---|---|
| Software Upgrade Token | 20B812 | 1.01.021 |
| Advanced Display Module (ADM) | 26D928 | 1.01.014 |
| System I/O Board | 26D959 | 1.01.020 |
| Auto Multi-Zone (AMZ) | 19Y520 | 1.04.005 |
| Gateway | 17P796 | 3.02.001 |
Software Upgrade Token 20B812 Series E
System 20B812.gti (Software Link) version 1.01.021
Advanced Display: 26D928 version 1.01.014
System I/O Board: 26D959 version 1.01.020
Auto Multi-Zone: 19Y520 version 1.04.005
Gateway: 17P796 version 3.02.001
Change History
Fixed an issue where the circuit breaker size could not be edited if the maximum number of channels was enabled.
Software Upgrade Token 17R827 Series D
- System: 20B812 Version 1.01.020
- Advanced Display: 26D928 version 1.01.014
- System I/O Board: 26D959 version 1.01.019
- Auto Multi-Zone: 19Y520 version 1.04.005
- Gateway: 17P796 version 3.02.001
- System no longer resets after a Gateway Map Update is performed.
- Improvements to Gateway Interface
- Material Tracker Improvements
- Improvements to HMI Language Translations
Software Upgrade Token 20B812 Series C
- System 20B812 Version 1.01.006
- Advanced Display: 26D928 version 1.01.002
- System I/O Board: 26D959 version 1.01.006
- Auto Multi-Zone : 19Y520 version 1.04.005
- Gateway: 17P796 version 3.02.001
- Improvements to auto-adapting refill control & refill timeout recovery
- HMI Improvements to descriptions and file timestamps
- Fixed an issue with pump control via discrete I/O
Software Upgrade Token: 20B812 Series B
- Advanced Display: 20B812 version 1.01.001
- USB Configuration: 26D928 version 1.01.001
- System I/O Board: 26D959 version 1.01.001
- Auto Multi-Zone: 19Y520 version 1.04.005
- Gateway: 17P796 version 3.02.001
- Initial Release.
Read, understand and follow all instruction manuals and warning labels supplied with all equipment. Only trained and qualified personnel should perform repairs on the equipment. To access the latest manuals in your preferred language go to "www.Graco.com" and use the "Search" function.