Warm Melt/Tandem Ram Software Change History

The Version History of the Warm Melt Supply System and Tandem Ram Software is listed below. The software currently installed on a Warm Melt Supply System can be found by navigating to Advanced Setup Screens 4 and 5. Details on this screen can be found in Appendix A of Warm Melt Supply System Instruction - Parts manual 313296. All Warm Melt Supply System systems should match one of the following system versions.

If an upgrade to a newer software version is desired, order the appropriate "Software Upgrade Token" as listed below. This Upgrade Token is used to upgrade software on all of the system components per the procedure described in GCA Module Programming manual 3A1244, included with the token.

Software Upgrade Token: 16C027 Series M

Display Module: P/N 257165: 15W524 version 1.06.006
Fluid Control Module: P/N 257915: 15X221 version 1.02.006
Gateway: Fieldbus (CGM): 15U193 version 2.06.004


Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762


Temperature Control Module: 15M871 version 1.07.005
High Power P/N 255774
Low Power P/N 256270

Fixed bug that did not allow correct entry of fieldbus settings for EthernetIP CGMs.

Software Upgrade Token: 16C027 Series K

Display Module: P/N 257165: 15W524 version 1.06.006
Fluid Control Module: P/N 257915: 15X221 version 1.02.006
Gateway: Fieldbus (CGM): 15U193 version 2.06.003


Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762


Temperature Control Module: 15M871 version 1.07.005
High Power P/N 255774
Low Power P/N 256270

  • Added Dura-Flo pump sizes. 
  • Change App ID in FCM software.

SYSTEM VERSION 1.08.001
Release Date: April 2013
Software Upgrade Token: 16C027 Series J
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.05.002
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.06.002
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.07.005
High Power P/N 255774
Low Power P/N 256270
Change History
Fixed bug causing crash when PROFINET Station Name setting changed
Fixed bug causing continual write of EEPROM

 

SYSTEM VERSION 1.07.001
Release Date: July 2012
Software Upgrade Token: 16C027 Series H
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.05.002
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.06.001
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.07.005
High Power P/N 255774
Low Power P/N 256270
Change History
Minor bug fix in CGM software.

 

SYSTEM VERSION 1.06.001
Release Date: June 2012
Software Upgrade Token: 16C027 Series G
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.05.002
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.05.004
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.07.005
High Power P/N 255774
Low Power P/N 256270
Change History
Fix distributed variable setting method which caused a delay in the task.
Change to perform verification at the application layer level.
Speed up Anybus task from 20 to 275 to improve overall response time.

 

SYSTEM VERSION 1.05.001
Release Date: April 2012
Software Upgrade Token: 16C027 Series F
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.05.002
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.04.002
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.07.005
High Power P/N 255774
Low Power P/N 256270
Change History
Enable adjustment and saving of screen contrast settings to EEPROM

 

SYSTEM VERSION 1.04.003
Release Date: February 2012
Software Upgrade Token: 16C027 Series E
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.04.003
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.04.002
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.07.005
High Power P/N 255774
Low Power P/N 256270
Change History
Make multiple error codes rotate on menu bar.
Enable heating of non-Active ram available during Prime function.
Change error code for "Invalid RTD value" from T9Ax to T6Ax on report screen.

 

SYSTEM VERSION 1.03.002
Release Date: 01 April 2011
Software Upgrade Token: 16C027 Series D
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.03.002
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.04.002
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.06.001
High Power P/N 255774
Low Power P/N 256270
Change History
Fix incorrect EEPROM access for temperature setting values for heat zones 7 - 12.
Fix missing Menu Bar bottom line after confirmation screen.
Change App ID from 0 to 5 per spreadsheet assignment.

Note: This update affects only tandem Warm Melt systems.

 

SYSTEM VERSION 1.03.001
Release Date: 23 March 2011
Software Upgrade Token: 16C027 Series C
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.02.006
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.04.002
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.06.001
High Power P/N 255774
Low Power P/N 256270
Change History
Correction to error messages in TCM (15M871).
Change processing of No Voltage and Voltage Low error processing in 15M871.
Correct processing of UINT32 data types in PROFIBUS communication.

 

SYSTEM VERSION 1.02.001
Release Date: 23 March 2011
Software Upgrade Token: 16C027 Series B
Component Part Numbers and Versions:
Display Module: P/N 257165: 15W524 version 1.02.006
Fluid Control Module: P/N 257915: 15X221 version 1.01.003
Gateway: Fieldbus (CGM): 15U193 version 2.03.000
Same for four fieldbuses:
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Temperature Control Module: 15M871 version 1.05.006
High Power P/N 255774
Low Power P/N 256270
Change History
Add Communications Gateway Module screens into 15W524.
Add RS-4 Drum Empty Distributed Variable for use in combined system with PCF at General Motors in 15W524.
Correct temperature error codes in 15W524.
Reduce CAN bus footprint.

Prior to System Version 1.02.001, there was no system version that combined software for all three modules into a single token.

Prior to System Version 1.02.001, the Display Module was part number 255336. This used a language-based user interface from software part number 15M408 OR 15Y066.

15M408 provided the following languages: English, Spanish, French, German, and Portuguese.

"15Y066 provided the following languages:
English, Chinese, Japanese, and Korean."

DISPLAY MODULE VERSION 2.01.001
Release Date: 23 March 2011
"Component Part Number: Display Module:
P/N 255336: 15M408 & 15Y066"
Change History
Release for production.

FLUID CONTROL MODULE VERSION 1.01.003
Release Date: 24 August 2009
"Component Part Number: Fluid Control Module: P/N 257915:
15X221 version 1.01.003"
Change History
Addition of Warm Melt compatibility.

FLUID CONTROL MODULE VERSION 1.01.000
Release Date: 01 April 2009
"Component Part Number: Fluid Control Module: P/N 257915:
15X221 version 1.01.000"
Change History
Release for production.

COMMUNICATIONS GATEWAY MODULE VERSION 2.02.007
Release Date: 13 October 2009
"Component Part Number:
Communication Gateway: 15U193 version 2.02.007"
DeviceNet P/N 15V759
EtherNet/IP P/N 15V760
PROFIBUS P/N 15V761
PROFINET P/N 15V762
Change History
Release for production.

Read, understand and follow all instruction manuals and warning labels supplied with all equipment. Only trained and qualified personnel should perform repairs on the equipment. To access the latest manuals in your preferred language go to "graco.com" and use the "Search" function.