V8M1 : No Line Voltage MZLP 1

To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.

  • Verify transformer has the correct tap selected.  
  • Verify CB-1 and RCD-1 are not tripped.  
  • Verify FU-4, FU-5 and FU-6 are not blown.  
  • Measure incoming power with system unplugged, if line voltage is less than 100 VAC, contact a qualified electrician to correct the low voltage.  
  • Verify the MZLP is plugged in at J2 and the AWB is plugged in at J5 and J6.