Mixed material is too dry
To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.
- Increase the water flow meter control setting to increase the water added to the material.
- Clean out the obstruction.
- Find a suitable water source that provides adequate pressure.
- The water feed must be able to supply water pressure of 40 psi or greater or else the mixer will not operate in the forward direction. A pressure switch that controls the forward direction operation of the mixer activates at 40 psi, allowing for forward operation. If water pressure is below 40 psi and the mixer must be operated in the forward direction, the pressure switch can be bypassed by connecting the water pressure bypass plug.