ToughTek: M680a
To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.
-
Cannot open or close air motor pilot ball valve on applicator. -
Cannot open or close fluid ball valve on hose at applicator. -
Cycles or fails to hold pressure at stall. -
Displacement pump operates, but output is low on both strokes. -
Displacement pump operates, but output is low on down stroke. -
Displacement pump operates, but output is low on upstroke. -
Erratic accelerated speed. -
Material is too thick to push through the hose without packing out. -
Motor powered but nothing comes out of hose. -
Poor finish or irregular spray pattern. -
Sprayer does not operate.