ToughTek: P20, P30, P30ht, P30X, P40
North America Support
ENTER ERROR CODE
Code was not found!
ToughTek P-Series Pumps Troubleshooting Advice
Pump is noisy when pumping.
Poor finish or irregular spray pattern.
The rotor/stator pump operates, but output is low.
Motor is powered but nothing comes out of the hose.
Erratic accelerated speed.
VFD overload fault.
Pump does not operate.
Material is too thick to push through the hose without packing out.
Electric motor will not start or stops during operation.
View All Error Codes