Electric Motor Will Not Start Or Electric Motor Stops During Operation

To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.

  • Check the position of the relay. 
    • If the relay is in the down position, check the motor. 
    • If the relay is in the up position, check wiring.

Check wiring between the following components:

  • motor junction box and CB4
  • wires on fuses F1 and F2
  • RLY2 and main disconnect switch
  • Confirm wiring is correct and insulation is intact. 
  • Reset CB4 within the electrical enclosure.