ToughTek: MP20, MP40
North America Support
ENTER ERROR CODE
Code was not found!
ToughTek MP-Series Pumps Troubleshooting Advice
Pump is noisy when pumping.
Electric motor will not start or stops during operation.
Motor is powered but nothing comes out of the hose.
Water pump will not run.
Erratic accelerated speed.
VFD overload fault.
Material is too thick to push through the hose without packing out.
Poor finish or irregular spray pattern.
Pump does not operate.
The rotor/stator pump operates, but output is low.
View All Error Codes