EcoQuip 2 EQp
To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.
-
In WASH mode, little or no water is flowing from the nozzle. -
No blast air flow when the blast control switch is engaged. The water pump does cycle while the blast control switch is engaged. -
No blast air flow when the blast control switch is engaged. The water pump DOES NOT cycle while the blast control switch is engaged. -
The blast control switch is not engaged, but blasting occurs. -
The blast hose recoils heavily when the blast control switch is engaged. Large slugs of abrasive and water are ejected from nozzle. -
The blast spray pattern is sputtering or irregular. -
The pot pressure relief valve is discharging water. -
Too much dust occurs during blasting. -
Too much water is coming from the nozzle in BLAST mode. -
Unable to fill or pressurize the pot with water. -
While in BLAST mode, with the blast control switch engaged, air is flowing from the nozzle but little or no abrasive is flowing from the nozzle. -
While the blast control switch is engaged, the blast air flow is fluctuating.