EVO HVLP Sprayer
EVO and EVO Plus HVLP
EVO Max HVLP
Videos
Troubleshooting
Ensure Cup assembly is firmly tightened to Sprayer Head. Inspect cup seal for damage, and adequate material is in cup.
Attach the PowerFlush adapter to the Spray Head. Attach to a faucet or water hose, and run water to ensure Spray Head is clean.
Ensure Union Nut is tight on Spray Head.
Ensure Cup assembly is firmly tightened to Sprayer Head.
Reduce flow control until desired pattern is achieved or reduce the nozzle size to achieve desired pattern.
Maintain consistent hand speed when spraying, increasing speed if needed. Ensure Sprayer is 7-10 inches from the surface.
Ensure cup has an adequate amount of material. Fill if needed.
Light and Splotchy Spray Pattern
Normal Spray Pattern
