Products
Protective Coatings
Xtreme PFP
Manuals
1-866-361-5959
North America Support
Global Support
ENTER ERROR CODE
Code was not found!
Troubleshooting Advice for Xtreme PFP
Air assist valve will not hold drum down or push plate up
Air bubbles in fluid.
Air leaks around cylinder rod.
Cycles or fails to hold pressure at stall.
Decreasing spraying pressure or poor spray pattern.
Does not operate.
Erratic accelerated speed.
Fluid squeezes past ram plate wipers.
Output low on both strokes
Output low on down stroke.
Poor finish or irregular spray pattern.
Pump will not prime properly or pumps air.
Ram raises and lowers too fast.
Ram will not raise or lower.
Runs sluggishly.