F9FB : Flow Cutback Low Inlet B Press.

To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.

Supply material is too cold

Condition material temperature per manufacturer's recommendations before spraying.

Inlet strainer screen is plugged

Follow procedure in proportioner manual to flush inlet strainer screens.

If using electric transfer pumps, Smart Supply feature is disabled due to missing or disabled inlet pressure sensors

Smart Supply feature is automatically enabled when the inlet pressure sensors are enabled and at least one electric transfer pump is installed. Confirm proper settings on the Setup > Supply System screen on the ADM.

If using pneumatic transfer pumps, resin inlet pressure is too low

Increase resin feed pump pressure.

If using pneumatic transfer pumps, resin inlet flow is too low

Change the larger resin feed pump.