SC02 : Pressure Deviation from Setpoint

To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.

NOTE: The unit does not check for pressure deviation at setpoint less than 400 psi (2.8 MPa, 28 bar).

To turn off automatic shutdown and/or change pressure tolerances for status code 2, see DIP Switch Settings, in manual.

If equipment cannot maintain enough pressure for a good mix with an impingement mix gun, try using a smaller mix chamber or nozzle.
Deviation can occur if power is turned on if function knob is not set to Park/Off. Leave knob in Park/Off mode until status indicator LED turns on.