Gusmer
To avoid serious injury follow all warnings and instructions in the manual. Wear appropriate personal protective equipment.
-
Electric Motor Will Not Start Or Electric Motor Stops During Operation -
Erratic Hose Temperature -
Erratic Pump Movement -
Fluid Leak At Pump Rod Seal -
Hose Does Not Heat -
Hose Does Not Maintain Temperature While Spraying -
Hose Heats But Heats Slower Than Usual Or Hose Does Not Reach Temperature -
Hose Temperature Exceeds Setpoint -
Hydraulic Pump Develops Low Or No Pressure. Pump Makes Screeching Noise. -
Low Hose Heat -
Material Imbalance -
No Pressure On One Side -
Pressure Imbalance -
Pressure Monitor Light Is Not On -
Pressure Monitor Light Is Red And Pump Directional Indicator Lights Are Off -
Primary Heat Controller Has Abnormally High Temperature Overshoots -
Primary Heater Does Not Heat -
Proportioning Pump Does Not Hold Pressure When Stalled -
Pump Output Low -
Pumps Do Not Reverse Direction Or Pumps Do Not Move